| 马自达RX-8 | ||
>MAZDA | 选择车型“马自达”,按回车 | |
>RX-8 | 选择车款“RX-8”,按回车 | |
SWITCH IGNITION ON | 打开点火开关 | |
PRESS ENTER KEY | 按回车 | |
PLEASE WAIT | 请等待通讯 | |
TRYING TO COMMUNICATE | ||
PAST 3 CAN | 显示此车ECU版本号 | |
XXXXXXXXXXXX | ||
PRESS ENTER KEY | 按回车 | |
ECU IDENTIFICATION | ||
FAULT CODE | ||
ACTUATORS | ||
>SPECIAL FUNCATION | 选择"特殊功能",按回车 | |
CLEAR PAST | ||
>ADD KEYS | 选择"匹配钥匙",按回车 | |
ONE TOKEN WILL | 将要使用一个代币 | |
BE USED | ||
BACK' TO EXIT | ||
ENTER TO PROCEED | 按回车键进行匹配 | |
MIN KEYS REQUIRED:2 | 最少需要2把钥匙，要获取密码 | |
CODED ACCESS | ||
PRESS ENTER KEY | 按回车键 | |
PLEASE SELECT CODE | ||
ENTRY NETHOD | ||
1.DEALER | 按2选择通过AD公司查码， | |
2.Advanced Diagnostics | ||
SECURITY CODE | 屏幕显示: | |
SERIAL NUMBER:113321 | MVP序列号：113321 | |
CALE VALUE :XXXX | 把左边3项查码资料输入网上 | |
CALE TYPE :X-X | 查码的登录资料里，然后按网上的CHECK | |
OUTCODE:XXXXXXXXX | 稍等就显示此次的输入码：INCODE:X… | |
SECURITY CODE | ||
INCODE:XXXXXXXXX | 输入网上获取的INCODE | |
PRESS ENTER KEY | 按回车键 | |
| 显示一把钥匙已经匹配好 | ||
KEY PROGRAMMED :1 | ||
BACK` TO EXIT | 此时按回车键匹配下一把钥匙 | |
ENTER TO PROGRAM NEXT KEY | ||
KEY PROGRAMMED :2 | ||
BACK' TO EXIT | 若匹配下一把钥匙按回车键。 | |
ENTER TO PROGRAM NEXT KEY | 结束匹配则按朝左键 ←退出 | |
| 例：此时按退出键，结束匹配 |
| 欢迎光临 中华锁艺人 (https://suoyiren.com./) | Powered by Discuz! X3.5 |